Tarot 680Pro Hexacopter (The Build)
Click here to view my gallery!
| From the start I did not plan to build this frame as it was designed. I wanted to extend the arms so it will accommodate 15″ props. All I did was swap out the shorter 16mm carbon fiber tubes from the 680Pro kit to the tubes from the standard 680 kit.
The initial setup:
Here you can see how I prep the CF tubes with all the wiring and LED lights
I had to drill some new holes for the 2nd distribution board
I mounted the distribution board with rubber dampers because I plane to use attach the IMU to the top of it. The idea is to reduce the amount of vibration to the IMU.
When I bought the SunnySky 3508 360kv Motors from the original owner he also included a set of DJI 15×5.2 Folding Props.
|
Ideally I wanted to use 30a ESC but the ones I wanted was not in stock so I went with the 25a Tmotors instead. With the the use of lower KV motors I never come close to hitting the 25amp draw.
